Larger salt water pools up to 50m³ can be used with one PURION 2501 can be cleaned ecologically harmless. In order to be able to fully use the advantages of a salt water pool to keep the skin healthy, cleaning on health aspects must also be aligned. The classic variant of the pool cleaning by chlorine contradicts this consciousness, because the advantages that a salt water pool has for the skin are lifted by the disadvantages of the chlorine. In contrast, the PURION 2501 P with the help of the UV-C disinfection process. The pool water is illuminated with UV-C, causing the DNA compounds of bacteria and algae to be dissolved. As a result, the salt water pool remains algae -free and can become an oasis of wellbeing. The PURION 2501 P does not change the water in taste or smell. Unlike cleaning with chlorine, the composition of the water does not change. A salt water pool should be maintained with the same care with which people give themselves through the purchase of such a pool.
This system is designed for a voltage range of 85-264V by a long-voltage operating operating device and can thus be used in many different countries. The system is equipped with a euro plug and can also be used for other types of plugs with an adapter (not included).
The UV-C lamp has a natural drop in performance over the duration of its lifetime. We guarantee that the lamp has reached the promised flow output after 10,000 hours. After this time, the lamp must be changed, the lamp runtime knife and the service life monitoring (OTC) signal the right time. The hours in which the lamp is switched on are counted and the values are output via an LED display. A green LED shines up to 9,000 hours, between 9,000 and 10,000 hours the pre -alarm is displayed with a yellow LED and after 10,000 hours a red LED lights up. So the right time is not missed to change the lamp.
This system is suitable for salt water due to the PVC reactor. Since the weld seams of stainless steel are attacked by the salt, there is no alternative to PVC for the salt water area.
In order to keep a pool permanently free from algae, the correct coordination between the pump and UV-C system is necessary. It applies that at least three times the pool content flows through the UV-C system during the day. The maximum flow power of 14m³/h should not be exceeded, because this leads to the water no longer being disinfected correctly. In certain cases, it is necessary to run the system longer: This is urgently required, for example, after larger rain or if the water was in the pool over the winter.
With an unfavorable starting point with a lot of algae, it can be an advantage to use a biological flocide agent to support the UV-C system.
In addition to the system, this bundle includes another replacement lamp, the right assembly tile and a service kit for intensive cleaning.