PURION 2001 PVC-U OTC Bundle

Unsere Produkte

WIR BERATEN SIE GERN!

Sie haben Fragen oder wünschen eine individuelle Beratung?

Beschreibung

The decision to install a salt water pool is mostly based on health aspects. Salt water is beneficial for the skin, it is gentle and protects the body from dehydration. Precisely because of these positive effects, it is crucial that the pool is cleaned in a way that is not harmful to health. Cleaning with chlorine is absolutely not recommended here, as the positive properties of salt water are almost completely cancelled out by the chlorine and other chemicals. The PURION 2001 P uses the UV-C disinfection process: In this process, algae are specifically illuminated with UV-C light, whereby the DNA compounds dissolve and the algae die. This gentle method of water purification does not change the taste, odor or composition of the water. With the PURION 2001 P, the principle can be applied to a 30m³ salt water pool. For a health-promoting saltwater pool, there is no more compatible purification than that by UV-C - a purification that is environmentally compatible and attractive from an economic perspective.

With a wide voltage ballast, this system is designed for a voltage range of 85-264V and can thus be used in many different countries. The unit is equipped with a Euro plug and can also be used for other types of plugs with an adapter (not included).

The UV-C lamp has a natural power loss over its lifetime. We guarantee that after 10,000 hours the lamp will have reached exactly the promised flow rate. After this time the lamp must be changed, the lamp runtime meter and the lifetime monitoring (OTC) will signal the right time. The hours that the lamp is on are counted and the values are output via an LED display. Up to 9,000 hours a green LED lights up, between 9,000 and 10,000 hours the pre-alarm is indicated by a yellow LED and after 10,000 hours a red LED lights up. Thus, the right time to change the lamp is not missed.

The PVC reactor makes this unit suitable for salt water. Since the welding seams of stainless steel are attacked by the salt, there is no alternative to PVC for saltwater applications.

In order to keep a pool permanently free of algae, the correct coordination between pump and UV-C system is necessary. At least three times the pool content should flow through the UV-C system during the day. The maximum flow rate of 8m³/h should not be exceeded, as this will result in the water no longer being disinfected correctly. In certain cases it is necessary to let the system run longer: This is urgently required, for example, after major rainfall or if the water has been in the pool over the winter.

In case of an unfavorable initial situation with a lot of algae, it can be advantageous to use a biological flocculant to support the UV-C system.

In addition to the system, this bundle also includes another replacement lamp, the matching mounting frame and a service kit for intensive cleaning.

Technische Daten

HerstellerPURION GmbH

ReaktorPVC-U

Anschluss AußengewindeDN 50 mm

Durchsatz8 m³/h pool water

DichtungFPM

Dimensionen (L x B in mm)670 x 100

Flanschabstand360 mm

Gewicht6 kg

Strahlernutzungsdauer10.000 h

Anzahl der Strahler1

Dosis300 J/m²

Maximale Temperatur 40 °C

GehäuseschutzartIP 65

Elektrischer Anschluss110 - 240 V, 50 - 60 Hz

Leistung48 W

Absicherung10 A

Wassertemperatur8 °C bis 40 °C

Download

Zum Download stehende Dokumente

Lieferumfang

- UV disinfection system
- UV lamp (48 W)
- Spare lamp (48 W)
- Service Kit
- suitable mounting clamps
- instruction manual

Zubehör

PURION service kit

€24,60
PURION UVC lamp 48 W

€79,99
PURION mounting set singles type 2

€32,09
Pack of 10 Universal Filter Socks

€21,39
PURION immersion pipe system T2000/2001 PVC-U

€85,59

FAQ

Häufig gestellte Fragen

Can this system overheat?

The Purion's pool systems are not exposed to overheating problem if the UVC system should be switched on, but no water flow takes place.

Does the system automatically switch on the water flow?

No. We recommend that the UV system always put the UV system into operation in combination with the pump, which uses the full flow for disinfection. Since the system has a relative large diameter, there is no failure, the pump should be defective and this does not lead to water flow when the UV lamp is switched.

How do I know which UV-C system is the right one for me?

For an optimal effect, we recommend changing the entire pool content at least three times a day. However, the system should be in operation at least 8 hours a day so that there is also sufficient ventilation and filtration. The circulation rate is therefore based on the respective performance of the pump used and sand filter. The net performance of the pump can be reduced by cable lengths and heights to be overcome.
Also interesting: In our compact systems, the pump, sand filter and UVC system are ideally coordinated and already pre -assembled.

How long does the system have to run to keep a pool with algae?

There is a simple calculation for this: the pool content should flow through the UV-C system at least three times a day in order to kill a large part of the algae by mixing a corresponding mixing. If the algae growth is reinforced, for example, if the phases of extreme solar radiation or after strong rainfall or a thunderstorm, we recommend the circulation rate to four times upheaval.
Regardless of the circulation rate, we recommend that the system have min. 8 hours a day in operation in order to enable sufficient ventilation and filtration.

Is chlorine also required for pool cleaning?

If all three basic recommendations for the use of UV-C system in the pool area, the pool can be operated completely without chlorine. If necessary, the selective application of a biological flocculation means is worthwhile. However, our high-quality UV-C lamps allow a combination of chlorine and UV-C, since no ozone is created that would be reactive with chlorine.

What distinguishes Purion's UV-C systems?

The high-quality UV-C lamps of the Purion brand are durable and very powerful. They produce a very high UV-C content. The lamps we use in the pool area are also used in other facilities in drinking water preparation. The UV lamps used do not emit any radiation below 250nm, which excludes the formation of toxic ozone. Thus, the Purion systems can be used in combination with other preparation procedures that e.g. chlorine.

Do you recommend the use of ozone?

No, from our point of view, ozone should not be used in the pool area under any circumstances. Ozone is highly toxic. Excess ozone has to be destroyed again, whereby it is usually unclear how much ozone is left. In addition, Ozon reacts with chlorine, so that the effect of both procedures is greatly reduced. Cheap produced UV lamps often also emit radiation below 250nm, which means that ozone can be formed. This is excluded from the Purion systems.

Why does the UV-C lamp have to be changed after 10,000 hours even though it still works?

Each UV-C lamp has a technical drop in the UV-C performance. The manufacturer guarantees that the system will reach 60% UV-C output after 10,000 hours. The specified data on the systems always refer to this 60% performance. However, the drop in performance continues to increase from a term of 10,000 hours. Therefore, the lamp still works, but there is no longer enough UV-C output for an optimal disinfection result.

When do I need a life of life?

A service life monitoring is recommended for all users who do not permanently let the system switch on. A change of the lamp is recommended every 10,000 hours, since the manufacturer also does not guarantee the performance, i.e. the amount of UV-C radiation dose required for safe disinfection.