Unsere Produkte


Sie haben Fragen oder wünschen eine individuelle Beratung?


+49 3641 327 9697

PURION 500 110 - 240 V AC OPD
PURION 500 110 - 240 V AC OPD
PURION 500 110 - 240 V AC OPD
PURION 500 110 - 240 V AC OPD
PURION 500 110 - 240 V AC OPD
PURION 500 110 - 240 V AC OPD

PURION 500 110 - 240 V AC OPD

Extra - with sensor monitoring

*inkl. ges. MWSt

Lieferzeit 1-2 Tage

Wähle die passende Überwachungsstufe:


The desire to lead a largely self-sufficient life centers on the question of drinking water supply. In order to be able to enjoy water from wells, lakes, rivers or cisterns, it must first be appropriately treated. Drinking water treatment is a complex field in which a suitable treatment chain must be put together depending on the condition of the source water. Bacteria, germs and viruses pose the greatest threat to health. The PURION 500 represents the perfect combination of a power-saving device and a very good disinfection system that leaves no chance for pathogens. Due to the small length of 32cm, this unit can be easily integrated into the smallest water circuits. In terms of dimensioning, the PURION 500 is ideal for use in small vacation homes and larger mobile homes. For self-sufficient living without worrying about drinking water quality, the PURION 500 is the safest solution.

Due to a wide voltage ballast, this system is designed for a voltage range of 85-264V and can thus be used in many different countries. The unit is equipped with a Euro plug and can also be used for other types of plugs with an adapter (not included).

This UV-C disinfection system from PURION fulfills all technical requirements of the drinking water ordinance. The used stainless steel 1.4571 is also used in the food industry and therefore fulfills the standard. In compliance with the prescribed maximum flow rate, the required UV-C dose of 400 J/m² is achieved with a UV-C transmission of 90% T1 cm. This UV-C system thus achieves a disinfection rate of 99.99%, which is required by law. For trademark protection reasons, this system does not have a DVGW certificate, so in individual cases it must be clarified with the health authority whether the UV-C disinfection system can be used.

Technische Daten

HerstellerPURION GmbH
ReaktorEdelstahl 1.4571
Anschluss AußengewindeR 1/2"
Durchsatz400 l/h drinking water
Dimensionen (L x B in mm)320 x 42
Gewicht2 kg
Strahlernutzungsdauer10.000 h
Anzahl der Strahler1
Dosis400 J/m²
Maximale Temperatur 40 °C
GehäuseschutzartIP 65
Elektrischer Anschluss110 - 240 V, 50 - 60 Hz
Leistung10 W
Absicherung10 A
Wassertemperatur2 °C bis 40 °C


Zum Download stehende Dokumente

Datenblatt 1:Herunterladen


- UV disinfection system
- UV lamp (10 W)
- Instruction manual


  • PURION service kit
  • PURION mounting set singles type 1
  • PURION UVC lamp 10 W
  • PURION immersion pipe system T500


Häufig gestellte Fragen

At what point does the UV-C system have to be installed in the drinking water cycle?

A UV-C disinfection system is always the last link in a water treatment chain, since the path to the withdrawal point should be kept as low as possible. Water filters in particular offer ideal conditions for settlement by bacteria. The freshly disinfected water would therefore germinate again if it would continue through the drinking water cycle after going through the UV-C system. Printing boilers should always be installed in front of the UV-C systems.

When do I need a life of life?

A service life monitoring is recommended for all users who do not permanently let the system switch on. A change of the lamp is recommended every 10,000 hours, since the manufacturer also does not guarantee the performance, i.e. the amount of UV-C radiation dose required for safe disinfection.

Does the system automatically switch on the water flow?

The UV system should be permanently switched on for various technical reasons:
1.) The UV system needs about 1 minute to achieve full performance.
2.) When igniting the lamp, as much energy is required as for operation over two hours.
3.) Each on and off cycle is at the expense of the service life.

How do I know which UV-C system is the right one for me?

The correct dimensioning of the systems is not based on the maximum daily consumption but the expected maximum point of time and is therefore dependent on the performance of the pump.

What should be considered when installing 12V DC and 24V DC systems?

It should be noted that no power supplies with powdered voltage are used, which means that the system can suffer irreparable damage.

Can the system be operated with photovoltaic panels?

Yes, that is possible. However, the use of a battery is always recommended to ignite the lamp. In addition, a solar controller should always be used.

Do you recommend fuel germination?

No, we advise flow reactors, as the maximum distance between the water to disinfect and the UV-C lamp is precisely defined. A tank collision system can only ensure a complete disinfection if it has a previously calculated revolution. In addition, flow reactors are much more efficient.

Sicherheit & Qualität





Schneller Versand

Flexible Zahlung