Email: info@uvconcept.com
Phone: +49 3641 327 9697
Official Purion dealer
Europe-wide delivery
-
-
-
-
-
-
-
-
-
-
-
- PURION IBC DN150 17W SPL BS
- PURION IBC DN150 17W SPL BS OTC
- PURION IBC DN150 17W SPL BS 12 V/24 V
- PURION IBC DN150 17W SPL BS OTC 12 V/24 V
- PURION IBC DN150 36W SPL BS
- PURION IBC DN150 36W OTC SPL BS
- PURION IBC DN150 48W SPL BS
- PURION IBC DN150 48W OTC SPL BS
- PURION IBC DN150 90W SPL BS
- PURION IBC DN150 90W OTC SPL BS
-
- PURION IBC DN225 17W SPL BS
- PURION IBC DN225 17W SPL BS OTC
- PURION IBC DN225 17W SPL BS 12 V/24 V
- PURION IBC DN225 17W SPL BS OTC 12 V/24 V
- PURION IBC DN225 36W SPL BS
- PURION IBC DN225 36W OTC SPL BS
- PURION IBC DN225 48W SPL BS
- PURION IBC DN225 48W OTC SPL BS
- PURION IBC DN225 90W SPL BS
- PURION IBC DN225 90W OTC SPL BS
-
- PURION IBC Universal 17W SPL BS
- PURION IBC Universal 17W SPL BS OTC
- PURION IBC Universal 17W SPL BS 12V/24V
- PURION IBC Universal 17W SPL BS OTC 12V/24V
- PURION IBC Universal 36W SPL BS
- PURION IBC Universal 36W OTC SPL BS
- PURION IBC Universal 48W SPL BS
- PURION IBC Universal 48W OTC SPL BS
- PURION IBC Universal 90W SPL BS
- PURION IBC Universal 90W OTC SPL BS
We are happy to advise you!
Do you have questions or need individual advice? Our expert is available on weekdays.
Opening hours: Mon–Fri 08:00–16:00
Description
The PURION IBC Tank Set 90W is primarily used for cloudy water. It protects the tank from contamination, such as the formation of a biofilm. In particular, the air flowing in when water is drawn is disinfected in the tank, which can very quickly cause contamination. This set is especially useful in combination with flow systems from PURION, as it protects the tank from excessive contamination and also treats the water to drinking water quality when drawn.
Features of the PURION IBC Tank Set 90W:
Shatter Protection
The protective glass is additionally coated with a Teflon layer so that in the event of an accident, such as cleaning, no glass shards are produced, effectively protecting the tank from contamination and people from injuries.
Safety System
The immersion heater is additionally secured with 3 metal rods, making it rigid and allowing it to be freely suspended in the tank.
Immersion Length
The immersion length of this system is 920 mm, making it suitable for larger tanks and cloudy water.
Available monitoring levels for this product
Our UV-C systems offer various monitoring levels that are tailored to each individual requirement.
without monitoring level
- Manuelle Inspektion erforderlich
- Unabhängig von Technik nutzbar
ab 629,29€
Selected
With lifespan monitoring
- Automatic runtime measurement of the UV-C lamp
- LED indicators for status and pre-alarms (Green/Yellow/Red)
- Easy operation without manual counting
ab 828,37€
Zum ProduktTechnical data
Here you will find all technical specifications.
| Plant type | PURION IBC UV Set 90 W Universal |
| Weight | 2.5 kg |
| Electrical connection | 110-240 V 50/60 Hz |
| Service life of spotlights | 10,000 h |
| Performance | 90 W |
| Protection | 10 A |
| Throughput | depending on the medium and geometric structure of the container, a calculation is required |
| Maximum operating pressure | 10 bar |
| Number of spotlights | 1 |
| Fastening | Universal mount for flexible attachment |
| Diameter quartz tube | Ø 23 mm |
We are happy to advise you!
Do you have questions or would like individual advice? Our expert is available on weekdays.
Opening hours: Mon–Fri 08:00–16:00
+49 3641 327 9697 info@uvconcept.comDownloads
Technical documents for download
Download data sheet
Scope of delivery
What is included in the delivery
(Safety bracket & shatter protection)
- Control box with electronic ballast 110-240 VAC, lamp cable ~ 3m,
UV lamp 90 W
- Universal flange bracket
Frequently asked questions
Here you will find answers to the most frequently asked questions about our product.
A UV-C disinfection system is always the last link in a water treatment chain, as the path to the point of use should be kept as short as possible. In particular, water filters provide ideal conditions for colonization by bacteria. The freshly disinfected water would therefore become contaminated again if it were to continue through the drinking water circuit after passing through the UV-C system. Pressure tanks should also always be installed before the UV-C systems.
Lifetime monitoring is recommended for all users who do not leave the system permanently on. A lamp change every 10,000 hours is recommended, as the manufacturer does not guarantee performance beyond that, meaning the amount of UV-C radiation dose necessary for safe disinfection.
The UV system should be permanently switched on for various technical reasons:
1.) The UV system takes about 1 minute to reach full power.
2.) When igniting the lamp, approximately as much energy is needed as for operation over two hours.
3.) Each on and off cycle shortens the lifespan.
The correct sizing of the systems is not based on the maximum daily consumption but on the expected maximum peak rate and is therefore dependent on the pump's performance.
It should be noted that no power supplies with pulsed voltage should be used, as this can cause irreparable damage to the system.
Yes, that is possible. However, it is always recommended to use a battery to ignite the lamp. Additionally, a solar controller should always be used.
No, we recommend flow reactors, as this precisely defines the maximum distance between the water to be disinfected and the UV-C lamp. A tank disinfection system can only ensure complete disinfection if it has a previously calculated circulation. Furthermore, flow reactors are significantly more efficient.
Zuletzt angesehen
Everything important about shipping & purchase
Do you Brauchen Sie Hilfe? We are here for you!