Unsere Produkte


Sie haben Fragen oder wünschen eine individuelle Beratung?


+49 3641 327 9697

Purion Pool-Skimmer-Desinfektionssocke, geschützt mit 10er-Pack universeller Filtersocken-Technologie von UV Concept GmbH.
Purion Pool-Skimmer-Desinfektionssocke, geschützt mit 10er-Pack universeller Filtersocken-Technologie von UV Concept GmbH.

Pack of 10 Universal Filter Socks


*inkl. ges. MWSt

Lieferzeit 1-2 Tage

  • Hier sind unsere Überwachungsstufen erklärt
  • Hier sind unsere Überwachungsstufen erklärt

Pack of 10 pools filter socks - Ideal for protected skimmer operation.

Ensure optimal protection for your pool skimmer with our durable and well-made filter socks. The size of the socks is 21.5x12.5 cm and they are specially designed for use in skimmers.

By using our filter socks, you will have to backwash less often and your pump will remain protected from damage. This means you spend more time in the pool and less time maintaining your skimmer.

Get our 10 pack of filter socks now and give your pool the protection it deserves!

- 10 universal filter socks
    Can this equipment overheat?

    PURION pool systems are not subject to overheating problems if the UVC system is switched on but there is no water flow.

    How do I know which UV-C system is right for me?

    For optimal effect, we recommend circulating the entire pool contents at least three times a day. However, the system should be in operation for at least 8 hours a day to ensure sufficient aeration and filtration. Our customer service will be happy to help you determine the appropriate sizing.

    How long does the system need to run to keep a pool free of algae?

    There is a simple calculation for this: the pool contents should flow through the UV-C system at least three times a day in order to kill a large part of the algae through appropriate mixing. If algae growth is increased, for example during periods of extreme sunshine or after heavy rainfall or a thunderstorm, we recommend setting the circulation rate to four times a day. Regardless of the circulation rate, we recommend that the system be in operation for at least 8 hours a day to allow for sufficient aeration and filtration.

    Is chlorine additionally required for pool cleaning?

    If all three basic recommendations for the use of UV-C equipment in the pool area are taken into account, the pool can be operated completely without chlorine. If necessary, the selective use of a biological flocculant is recommended. However, our high-quality UV-C lamps allow a combination of chlorine and UV-C, since no ozone is produced, which would be reactive with chlorine.

    What distinguishes the UV-C systems from PURION?

    PURION's high-quality UV-C lamps are long-lasting and very powerful. They produce a very high UV-C content. The lamps we use in the pool area are also used in other systems for drinking water treatment. The UV lamps used do not emit radiation below 250 nm, which excludes the formation of toxic ozone. This means that PURION systems can be used in combination with other treatment processes that use chlorine, for example.

    What are the requirements for the electrical installation?

    Our compact systems can be operated via regular sockets, which are fused with 10A or 16A as is usual in households. Ideally, these are also protected by a separate FI/LS switch rated at 30mA or better 10mA.

    Do you recommend the use of ozone?

    No, in our view, ozone should not be used in pool areas under any circumstances. Ozone is highly toxic. Excess ozone must be destroyed again at great expense, and it is usually unclear how much ozone is left. In addition, ozone reacts with chlorine, so the effect of both processes is greatly reduced. Cheaply produced UV lamps often also emit radiation below 250 nm, which can cause ozone to form. This is excluded with the PURION systems.

    Why does the UV-C lamp have to be replaced after 10,000 hours even though it is still working?

    Every UV-C lamp has a technically caused drop in UV-C output. The manufacturer guarantees that the system will still achieve 60% UV-C output after 10,000 hours. The data given for the systems also always refer to this 60% output. However, from a running time of 10,000 hours, the drop in output continues to increase. Therefore, the lamp still works, but there is no longer enough UV-C power for an optimal disinfection result.

    When do I need lifetime monitoring?

    Lifetime monitoring is recommended for all users who do not leave the system switched on permanently. Replacement of the lamp every 10,000 hours is recommended, as the manufacturer does not guarantee performance beyond this, i.e. the amount of UV-C radiation dose required for safe disinfection.

    Sicherheit & Qualität





    Schneller Versand

    Flexible Zahlung