Unsere Produkte


Sie haben Fragen oder wünschen eine individuelle Beratung?


+49 3641 327 9697

Purion GmbH's PURION 2500 36 W DUAL Starter, UV-Anlage, Wasseraufbereitung.
Ein Paar Aluminiumstangen auf weißem Hintergrund mit einer UV-Anlage für PURION 2500 Wasseraufbereitung der PURION GmbH.
Eine PURION 2500 36 W DUAL Starter UV-Anlage Blaulichtröhre auf weißem Hintergrund für Wasseraufbereitung, hergestellt von der PURION GmbH.
Purion GmbH's PURION 2500 36 W DUAL Starter, UV-Anlage, Wasseraufbereitung.
Ein Paar Aluminiumstangen auf weißem Hintergrund mit einer UV-Anlage für PURION 2500 Wasseraufbereitung der PURION GmbH.
Eine PURION 2500 36 W DUAL Starter UV-Anlage Blaulichtröhre auf weißem Hintergrund für Wasseraufbereitung, hergestellt von der PURION GmbH.

PURION 2500 36 W DUAL Starter

Plus - with service life monitoring

*inkl. ges. MWSt

Lieferzeit 1-2 Tage

  • Hier sind unsere Überwachungsstufen erklärt
  • Hier sind unsere Überwachungsstufen erklärt

Experience the outstanding performance of the PURION 2500 36W Dual starter! This UV system will take your water to a new level of quality. With an impressive flow rate of 5,000 liters per hour, it is perfect for single and multi-family homes with up to 16 people.

At the heart of this system is its first-class UV technology, which is manufactured in Germany. It guarantees reliable and efficient disinfection of your water. With the PURION 2500 36W Dual starter, you can rest assured that your water supply is always hygienic and safe.

We have already thought of everything to make installation easier for you. The system is supplied with two pre-assembled Big Blue 10x4.5 inch filters. One of these 50 micron filter cartridges ensures effective removal of particles, while the other is equipped with activated carbon to reduce odors and impurities.

So that you can rely on longevity and quality, all connections of this UV system are equipped with high-quality stainless steel screw connections. They provide a robust and reliable connection that can withstand pressure.

As an additional feature, the PURION 2500 36W Dual starter has a service life monitoring function. You will receive timely notifications when it is time to replace the UV lamps to ensure optimal performance. This ensures that your water disinfection remains continuous and reliable.

Invest in the best water quality for your home with the PURION 2500 36W Dual starter. Trust in German quality and enjoy clean and safe water for your family.

Blog Article:
Technical data:
HerstellerPURION Ltd.
ReaktorStainless steel 1.4571
AnschlussR 1"
Durchsatz5000 l/h drinking water
Dimensionen (L x B in mm)928 x 42 (2x)
Flanschabstand850 mm
Gewicht11 kg
Strahlernutzungsdauer10.000 h
Anzahl der Strahler2
Dosis400 J/m²
Maximale Temperatur 40 °C
GehäuseschutzartIP 65
Elektrischer Anschluss110 - 240 V, 50 - 60 Hz
Leistung36 W (2x)
Absicherung10 A
Maximaler Betriebsdruck10 bar
Wassertemperatur2 ºC bis 40 ºC
Download data sheetDownload file
Datenblatt 1:Herunterladen
Download data sheetDownload file
Télécharger la fiche techniqueDownload file
Download Datenblatt SpanischDownload file
Download Datenblatt ItalienischDownload file
Download Datenblatt PolnischDownload file
Datenblatt 1:Herunterladen
Datenblatt 1:Herunterladen
Datenblatt 1:Herunterladen
Bedienungsanleitung 1:Herunterladen
Scope of delivery:
- UV disinfection system
- 2x UV lamp (36 W)
- Operating instructions
Adapter sets and fittings:
To the adapter sets
Suitable filter systems:
Ein blauer Wasserfilter auf weißem Hintergrund.
To the water filters
  • PURION UVC lamp 36 W
  • PURION service kit
  • PURION mounting set Duals type 1
Blog Article:
Frequently asked questions:
At what point does the UV-C system have to be installed in the drinking water cycle?

A UV-C disinfection system is always the last link in a water treatment chain, since the path to the withdrawal point should be kept as low as possible. Water filters in particular offer ideal conditions for settlement by bacteria. The freshly disinfected water would therefore germinate again if it would continue through the drinking water cycle after going through the UV-C system. Printing boilers should always be installed in front of the UV-C systems.

Why does the UV-C lamp have to be changed after 10,000 hours even though it still works?

Each UV-C lamp has a technical drop in the UV-C performance. The manufacturer guarantees that the system will reach 60% UV-C output after 10,000 hours. The specified data on the systems always refer to this 60% performance. However, the drop in performance continues to increase from a term of 10,000 hours. Therefore, the lamp still works, but there is no longer enough UV-C output for an optimal disinfection result.

When do I need a life of life?

A service life monitoring is recommended for all users who do not permanently let the system switch on. A change of the lamp is recommended every 10,000 hours, since the manufacturer also does not guarantee the performance, i.e. the amount of UV-C radiation dose required for safe disinfection.

Can this system overheat?

If there is no water withdrawal when the lamps are operated, the water inside the system heats up. With the 10W, 17W and 36W systems, this effect is negligible because the water temperature does not increase above 40 ° C. However, if the water is heated more than 40 ° C, as is possible when the 48W and 90W variant is operated, the lifespan of the lamp can be negatively influenced. In these systems, it is therefore recommended to ensure a steady water flow.

Does the system automatically switch on the water flow?

The UV system should be permanently switched on for various technical reasons:
1.) The UV system needs about 1 minute to achieve full performance.
2.) When igniting the lamp, as much energy is required as for operation over two hours.
3.) Each on and off cycle is at the expense of the service life.

How do I know which UV-C system is the right one for me?

It is not important to the average water consumption per day, but what maximum acceptance quantities can occur. Therefore, the correct drinking water system is determined by the existing withdrawal stations and the number of people in the house. A tap has fully turned on an output of 300 to 500 liters per hour. If in doubt, the next stronger system should be used.

Do you recommend fuel germination?

No, we advise flow reactors, as the maximum distance between the water to disinfect and the UV-C lamp is precisely defined. A tank collision system can only ensure a complete disinfection if it has a previously calculated revolution. In addition, flow reactors are much more efficient.

What do I need a sensor for and to what extent does it differ from the life of life?

A UV-C sensor is used to measure the UV-C output released directly on the lamp. This ensures significantly higher security for the user, since a drop in performance is directly signaled. This can be too bad transmission or a natural drop in performance of the lamp due to the eore of the recommended maximum operating time of 10,000 hours.

Can I use these systems as drinking water systems?

If in doubt, this must be clarified with the health department. The operating certificate for the systems in the download area of ​​the respective product pages of this online shop are available for this. We will also be happy to advise you personally on this topic. Alternatively, with the Purion DVGW Zert, we also offer a UV system certified both according to DVGW and Ö-Norm.

Which UV-C dose is used?

We use a UV-C dose of 400 J/m² for safe disinfection. This performance is sufficient to achieve a disinfection quota of 99.99% in compliance with the specified flow rate and transmission. Thus, water from a tank or container can be prepared precisely.

Sicherheit & Qualität





Schneller Versand

Flexible Zahlung