
UV system for pools: simple and effective
|
|
Time to read 4 min
|
|
Time to read 4 min
For many, a pool in the garden is the epitome of relaxation and luxury. But in order to enjoy the bathing fun permanently, the pool water must be clean, clear and, above all, hygienically perfect. This is where she plays UV system for pools a central role. It offers a chemical -free method for disinfection that is not only effective, but also environmentally friendly.
The quality of the pool water depends on several factors, including filtration, circulation and disinfection. While sand filters and pumps ensure that dirt particles and contamination are removed from the water, the UV system ensures the killing of microorganisms such as bacteria, viruses and algae. These microorganisms can not only affect water quality, but also pose health risks for bathers.
A UV system for pools uses ultraviolet light in the UV-C spectrum to destroy the DNA of microorganisms. As soon as the water is led through the UV system, bacteria and viruses are killed and algae inactivated without chemical residues in the water. This makes UV disinfection a particularly gentle and at the same time effective method that keeps the water safe and clear.
To the best of your UV system for pools Getting out should be part of a comprehensive water treatment chain. This chain comprises several steps that work together to continuously clean and disinfect the water.
The pump is the heart of every pool. It ensures that the water keeps moving and is led by the various filter systems. The sand filter is the first station where rough dirt particles and contaminants are filtered out of the water. This mechanical cleaning is essential to maximize the efficiency of the subsequent UV system.
After the sand filter, the water is led through the UV system. Here all the remaining microorganisms are killed without chemically stressing the water. The UV disinfection is particularly effective against chlorine-resistant organisms and contributes significantly to keep water quality at a high level.
In some cases, it may be necessary to treat the water chemically to regulate certain parameters such as the pH or alkalinity. This can be done by adding chlorine or other chemicals, but should be reduced to a minimum if possible in order to protect the environment and not to impair the health of the bathers.
To ensure that your UV system for pools works optimally, some basic rules should be observed:
For effective disinfection, the entire pool content should be circulated at least three times a day by the UV system. In times of increased loads, such as after heavy rain, in intensive sunlight or during the algae season, it is advisable to increase the circulation rate to 3.5 to 4 times. This ensures that all microorganisms are regularly guided and killed by the UV system.
Even if the UV system kills microorganisms, the mechanical cleaning of the pool is essential. Dirt and algae that set on the walls or on the floor cannot be fully recorded by the pump and the UV system. A pool robot or manual cleaning with brushes ensures that these areas remain clean and no breeding grounds for algae.
The positioning of the input and outlets in the pool plays an important role in water circulation. Ideally, these should be placed at opposite ends of the pool in order to ensure that the water is evenly distributed. A good hydraulic ensures that the entire water is regularly circulated by the filter systems and the UV system.
In order to obtain the efficiency of the sand filter and thus also the UV system, regular back and rinsing is essential. The accumulated dirt particles are rinsed out of the filter and the filter system is put back into optimal condition. Depending on the usage intensity of the pool, the backwash should be carried out about every one to two weeks.
In order to further improve the lifespan of your UV system and the general water quality, you can take additional measures:
The UV system for pools offers numerous advantages over conventional chemical disinfection methods:
One UV system for pools is an indispensable part of modern and environmentally friendly water treatment. It not only ensures clear and clean water, but also reduces the use of chemicals, which benefits both the environment and bathers. Due to the integration into a comprehensive water treatment chain, which also includes the pump, sand filter and, if necessary, additional water treatment measures, permanently high water quality is guaranteed.
With the observance of the basic rules for the operation and the implementation of additional measures, your pool remains a place of relaxation and safe bathing pleasure all year round.