Liquids such as cooling and lubricant emulsions as well as fuels can easily tip over and spoil. As a result, machines can be damaged by, for example, incorporating fine nozzles with mold or algae particles. Harmful chemicals often attempt to prevent this, but this is not only associated with environmentally harmful, but also with high costs. These liquids with high density can be used with the system PURION 500 Pro can be disinfected reliably by UV-C radiation. The fluid film strength is only 2mm, which does not suffer the UV output even with a low UV transmission. Used water can be disinfected at 300 l/h, emulsions with 200 l/h. PURION 500 can be serviced without tools, which affects both cleaning and installation of spare parts.
The Pro system has no surveillance in this equipment, it is only displayed if the lamp has a failure. It should be noted that the lamp must be changed after 10,000 hours. Within these 10,000 hours, the lamp always has an output of at least 60%. With this performance, the promised disinfection can be observed.