With the help of the PURION 1000 H, Legionella in a hot water circuit can be specifically killed based on the physical principle of UV-C disinfection. In this type of disinfection, the water is illuminated with UV-C light, which dissolves DNA compounds. Legionella are reliably killed in this way, better and above all more efficiently than with other methods. Especially in energy-saving systems, such as heating water through a solar panel with a heat exchanger, borderline temperature ranges of 40-50°C are reached, in which Legionella feel very comfortable. The popular but extremely expensive trick of heating the water to 70°C makes little sense here, as the electricity savings from the solar panel become superfluous. To avoid this expensive solution, UV-C disinfection is recommended. With a very energy-saving lamp with an extraordinarily long lifespan, additional money can be saved here. Even use in single-family homes with up to 6 people pays off. With the PURION 1000 H, you can be sure that you will not contract a disinfection disease caused by Legionella while showering or bathing.
Thanks to a wide voltage ballast, this system is designed for a voltage range of 85-264V and can therefore be used in many different countries. The system is equipped with a Euro plug and can also be used with an adapter (not included) for other plug types.
The UV-C lamp has a natural performance drop over the course of its lifetime. We guarantee you that the lamp will have reached the promised flow performance after 8,000 hours. After this time, the lamp must be replaced, the lamp runtime meter and the lifetime monitoring (OTC) signal the right time. The hours in which the lamp is switched on are counted and the values are displayed via an LED display. Up to 7,000 hours, a green LED lights up, between 7,000 and 8,000 hours, the pre-alarm is indicated with a yellow LED, and after 8,000 hours, a red LED lights up. Thus, the right time for the lamp replacement is not missed.
This UV-C disinfection system from PURION meets all the technical requirements of the drinking water ordinance. The stainless steel 1.4571 used is also used in the food industry and thus meets the standard. By adhering to the prescribed maximum flow rate, the required UV-C dose of 400 J/m² is achieved at a UV-C transmission of 90% T1 cm. Thus, this UV-C system achieves a disinfection rate of 99.99%, as required by law. For trademark protection reasons, this system does not have a DVGW certificate, so in individual cases, it must be clarified with the health department whether the UV-C disinfection system can be used.
In this Bundle, in addition to the system, an additional replacement lamp, the appropriate mounting frame, and a service kit for intensive cleaning are included.