Skip to content
The PURION GmbH Pool 40 Stainless Steel Basic is an industrial water filtration and purification system with a blue tank, control unit, pressure gauge, and labeled pipes for reliable swimming pool water disinfection using modern UV-C technology.

PURION Pool 40 Stainless Steel Basic

Regular price
Sale price 2.872,70€ Regular price 2.987,65€

Available monitoring levels for this product

Our UV-C systems offer various monitoring levels tailored to every individual requirement.

Without monitoring level

Without monitoring level

  • Manual inspection required
  • Can be used independently of technology
With lifetime monitoring

With lifetime monitoring

  • Automatic operating time measurement of the UV-C lamp
  • LED indicators for status and pre-alarms (green/yellow/red)
  • Easy operation without manual counting

The PURION Pool 40 Stainless Steel is the powerful UV-C disinfection solution for private pools up to 30 m³ – designed for operators who rely on robust materials, high operational safety, and sustainable water quality.

With 48 watts of UV-C power and an optimally tuned flow rate of up to 6 m³/h, the circulating pool water is reliably disinfected. Bacteria, viruses, and algae are inactivated directly in the water cycle – before they can multiply in the pool. The result: crystal-clear, hygienically safe water with significantly reduced chemical usage.

Stainless Steel – built for continuous operation

The high-quality stainless steel housing stands for maximum corrosion resistance, high pressure stability, and long service life. Unlike simple plastic systems, the stainless steel version offers significantly higher mechanical load capacity and is designed for long-term use in demanding pool environments.

Consciously without monitoring – full control by the operator

This version dispenses with integrated lifetime monitoring and is aimed at experienced pool operators who plan maintenance intervals independently. The proven PURION UV-C technology delivers the same high disinfection performance as the monitored variant – efficient, energy-optimized, and reliable.

The system is delivered fully pre-assembled and water-pressure tested. Installation is straightforward and can be realized without complex calculations. Low-maintenance in operation, economical in consumption, and designed for long-term operational safety.

This is not a compromise solution –
this is clear, durable technology.

Note: Depending on bathing load, environmental influences, or legal requirements, a minimal addition of disinfectants may be recommended in individual cases for additional security.

Your benefits at a glance

✔ 48 Watt UV-C high-performance disinfection
✔ Suitable for pools up to 30 m³
✔ Robust industrial-grade stainless steel housing
✔ High pressure and corrosion resistance
✔ Low maintenance and energy-efficient
✔ Fully pre-assembled & water-pressure tested
✔ Significantly reduced chemical usage
✔ Durable, sustainable investment

More products compared with PURION Pool 40 Stainless Steel Basic

More products compared with PURION Pool 40 Stainless Steel Basic
PURION Pool 40 Stainless Steel Basic This product
Recommended pool size
Power consumption
Water flow rate
Safety level
System type
Price 2.872,70€3.332,51€2.757,74€1.929,00€

Frequently asked questions about PURION Pool 40 Stainless Steel Basic

Here you will find answers to the most frequently asked questions about our product.

The pool systems from PURION are not subject to overheating problems if the UVC system is turned on but there is no water flow.

For optimal effect, we recommend circulating the entire pool content at least three times daily. However, the system should be in operation for at least 8 hours daily to ensure sufficient ventilation and filtration. Our customer service is happy to help you determine the appropriate sizing.

There is a simple calculation for this: the pool content should flow through the UV-C system at least three times a day to kill a large portion of the algae through proper mixing. If algae growth is increased, for example during periods of extreme sunlight or after heavy rainfall or a thunderstorm, we recommend setting the circulation rate to a fourfold circulation temporarily. Regardless of the circulation rate, we recommend having the system in operation for at least 8 hours daily to allow sufficient ventilation and filtration.

By considering all three basic recommendations for using a UV-C system in the pool area, the pool can be operated completely without chlorine. Occasionally, the targeted use of a biological flocculant may be advisable. However, our high-quality UV-C lamps allow a combination of chlorine and UV-C, as no ozone is produced, which would react with chlorine.

The high-quality UV-C lamps from the brand PURION are durable and very powerful. They produce a very high UV-C content. The lamps we use in the pool area are also used in other systems for drinking water treatment. The UV lamps used do not emit radiation below 250nm, which excludes the formation of toxic ozone. Thus, the systems from PURION can be used in combination with other treatment methods that use, for example, chlorine.

Our compact systems can be operated via regular sockets, which are typically secured with 10A or 16A. Ideally, this is also secured with a separate FI/LS switch designed for 30mA or better 10mA.

No, from our perspective, ozone should not be used in the pool area under any circumstances. Ozone is highly toxic. Excess ozone must be laboriously destroyed again, and it is often unclear how much ozone is left. Furthermore, ozone reacts with chlorine, significantly reducing the effectiveness of both methods. Cheaply produced UV lamps often emit radiation below 250nm, which can lead to ozone formation. This is excluded in the systems from PURION.

Every UV-C lamp has a technically induced decrease in UV-C performance. The manufacturer guarantees that the system still reaches 60% UV-C performance after 10,000 hours. The specified data for the systems always refer to this 60% performance. However, after 10,000 hours of operation, the performance decrease continues. Therefore, the lamp still works, but it no longer produces enough UV-C performance for optimal disinfection results.

A lifespan monitoring is recommended for all users who do not keep the system permanently switched on. A lamp replacement every 10,000 hours is recommended, as the manufacturer does not guarantee the performance, i.e., the amount of UV-C radiation dose necessary for safe disinfection, beyond that.

Made in Germany

Our products stand for the highest quality and are manufactured with precision in Germany.

30 days free returns

You can return your order free of charge within 30 days without any hassle.

Free customer consultation

Our experienced team is always available to provide you with free advice and assistance.

Official Purion dealer

Rely on the guarantee and quality of an official Purion dealer.

Ihr Berater

Ask a question

Do you have questions or would you like individual advice? Our expert is available on weekdays.

Opening hours: Mon–Fri 08:00–16:00

The fields marked * are required.