Skip to content
The PURION GmbH Pool 40 Edelstahl Plus is a complete pool system with a blue tank, stainless steel pool filter, measuring instruments, electronic control box, and is mounted on a metal frame.

PURION Pool 40 Stainless Steel Plus

Regular price 21.279,00 kr
Sale price Regular price

Available monitoring levels for this product

Our UV-C systems offer various monitoring levels tailored to every individual requirement.

Without monitoring level

Without monitoring level

  • Manual inspection required
  • Can be used independently of technology
With lifetime monitoring

With lifetime monitoring

  • Automatic operating time measurement of the UV-C lamp
  • LED indicators for status and pre-alarms (green/yellow/red)
  • Easy operation without manual counting

The PURION Pool 40 stainless steel with lifetime monitoring is not an accessory – it is the upgrade for demanding pool owners. Developed for pools up to 30 m³, it combines powerful 48-watt UV-C technology, a self-priming Speck Badu Magic II 6 pump, an efficient sand filter with a 6-way top-mount valve, and high-quality special granulate into a perfectly coordinated overall system.

No more constant chlorination. Welcome to real, clear water.

The integrated UV-C disinfection reliably destroys bacteria, viruses, and algae directly in the water cycle. The result: crystal clear, odorless, and skin-friendly water – without permanent chemical exposure. Your pool no longer feels like a swimming pool, but like fresh water.

Thanks to intelligent lifetime monitoring, you always have full control. The system automatically informs you when a lamp change is necessary. No uncertainty. No loss of performance. No hidden hygiene risks.

The stainless steel housing stands for industrial quality and maximum durability. Corrosion-resistant, robust, and designed for permanent use. The entire system is pre-assembled and water-pressure tested – connect, start up, relax.

Developed by pool professionals. Built for uncompromising operators.

The PURION Pool 40 has been designed so that no complex calculations or installation steps are required. You receive a fully coordinated system in which all components harmonize perfectly – hydraulically, technically, and hygienically.

This is not a DIY solution.
This is a sustainable pool disinfection strategy.

Note: Depending on bathing load, environmental influences, or legal requirements, a minimal addition of disinfectants may be recommended for additional safety in individual cases.

Your advantages at a glance

✔ High-quality stainless steel system in industrial quality
✔ Self-priming Speck Badu Magic II 6 pump integrated
✔ 6-way top-mount valve for maximum control
✔ Pre-assembled & water-pressure tested – ready for use
✔ Low maintenance & energy efficient
✔ Operation up to 30 m³
✔ Crystal clear water without permanent chlorine exposure
✔ Intelligent lifetime monitoring included

More products compared with PURION Pool 40 Stainless Steel Plus

More products compared with PURION Pool 40 Stainless Steel Plus
PURION Pool 40 Stainless Steel Plus This product
Recommended pool size
Power consumption
Water flow rate
Safety level
System type
Price 21.279,00 kr20.129,00 kr24.229,00 kr16.369,00 kr

Frequently asked questions about PURION Pool 40 Stainless Steel Plus

Here you will find answers to the most frequently asked questions about our product.

The pool systems from PURION are not subject to overheating problems if the UVC system is turned on but there is no water flow.

For optimal effect, we recommend circulating the entire pool content at least three times daily. However, the system should be in operation for at least 8 hours daily to ensure sufficient ventilation and filtration. Our customer service is happy to help you determine the appropriate sizing.

There is a simple calculation for this: the pool content should flow through the UV-C system at least three times a day to kill a large portion of the algae through proper mixing. If algae growth is increased, for example during periods of extreme sunlight or after heavy rainfall or a thunderstorm, we recommend setting the circulation rate to a fourfold circulation temporarily. Regardless of the circulation rate, we recommend having the system in operation for at least 8 hours daily to allow sufficient ventilation and filtration.

By considering all three basic recommendations for using a UV-C system in the pool area, the pool can be operated completely without chlorine. Occasionally, the targeted use of a biological flocculant may be advisable. However, our high-quality UV-C lamps allow a combination of chlorine and UV-C, as no ozone is produced, which would react with chlorine.

The high-quality UV-C lamps from the brand PURION are durable and very powerful. They produce a very high UV-C content. The lamps we use in the pool area are also used in other systems for drinking water treatment. The UV lamps used do not emit radiation below 250nm, which excludes the formation of toxic ozone. Thus, the systems from PURION can be used in combination with other treatment methods that use, for example, chlorine.

Our compact systems can be operated via regular sockets, which are typically secured with 10A or 16A. Ideally, this is also secured with a separate FI/LS switch designed for 30mA or better 10mA.

No, from our perspective, ozone should not be used in the pool area under any circumstances. Ozone is highly toxic. Excess ozone must be laboriously destroyed again, and it is often unclear how much ozone is left. Furthermore, ozone reacts with chlorine, significantly reducing the effectiveness of both methods. Cheaply produced UV lamps often emit radiation below 250nm, which can lead to ozone formation. This is excluded in the systems from PURION.

Every UV-C lamp has a technically induced decrease in UV-C performance. The manufacturer guarantees that the system still reaches 60% UV-C performance after 10,000 hours. The specified data for the systems always refer to this 60% performance. However, after 10,000 hours of operation, the performance decrease continues. Therefore, the lamp still works, but it no longer produces enough UV-C performance for optimal disinfection results.

A lifespan monitoring is recommended for all users who do not keep the system permanently switched on. A lamp replacement every 10,000 hours is recommended, as the manufacturer does not guarantee the performance, i.e., the amount of UV-C radiation dose necessary for safe disinfection, beyond that.

Made in Germany

Our products stand for the highest quality and are manufactured with precision in Germany.

30 days free returns

You can return your order free of charge within 30 days without any hassle.

Free customer consultation

Our experienced team is always available to provide you with free advice and assistance.

Official Purion dealer

Rely on the guarantee and quality of an official Purion dealer.

Ihr Berater

Ask a question

Do you have questions or would you like individual advice? Our expert is available on weekdays.

Opening hours: Mon–Fri 08:00–16:00

The fields marked * are required.